Advertisement
Read this note before proceeding
1.
Avoid using large amount of pipe putty on pipe
joints. Putty is damaging to all automatic flush
valves.
2.
After installing stop valve and prior to
installing flush valve, purge stop valve at high
pressure for one minute, (purge into a bucket if
available). Purging valve in this way will remove
particles that would otherwise find their way
into the flush valve causing immediate damage.
Caution
MAC FAUCETS
7308 Alondra Blvd
Paramount, CA 90723
310-562-808-2240
Tel 866-558-3200
Fax 310.919.3073
www.macfaucets.com
Advertisement
