Setting Up The Pc Card - ActionTec 802CTG User Manual

Setting Up
the PC Card
The instructions that follow in this chapter parallel the steps contained in the
Actiontec Connection
to setting up the
PC
before attempting any other procedures.
To set up the Card, the drivers must be loaded, the
PC
slot of the computer, and then the
PCMCIA
there is an available wireless signal (through an access point or another computer)
to which the Card can connect.
PC
1. Insert the Installation
Connection
1-2-3
Card are loaded onto the hard drive, then the first Connection
appears. Read the onscreen instructions, then click Next.
☞
Note: If Connection 1-2-3 does not start automatically, click
Start from the desktop, then select Run. Type
(with "d" representing the drive letter of the computer's
drive) in the "Open" text box, and click OK.
ROM
®
setup utility, which provides a visual, step-by-step guide
1-2-3
Card. It is recommended the user run Connection
in the
CD CD-ROM
starts automatically. Temporary files and drivers for the
Card inserted into the
PC
Card configured. Also, make sure
PC
drive of the laptop computer.
d:\c123.exe
5
2
first,
1-2-3
PC
screen
1-2-3
CD-