ActionTec 802CTG User Manual page 23

Actiontec 54 Mbps Wireless PC Card User Manual
2. Type the appropriate
3. Select an authentication type from the "Authentication" list box (Open
System, Shared Key, or Auto Switch).
4. In the "Key Format" section, select the key's character type (64-bit, 128-bit, or
256-bit).
5. Select the key to use by clicking in the appropriate circle (1, 2, 3, or 4). This
encryption key matches the key used in the device being connected to, such as
an access point or wireless gateway/router.
6. Click OK.
802.1x Configuration
If or
WEP WPA
the Authentication Mode list box, the "
Protocol - Select an authentication protocol from this section.
Password - if "
EAP
section is active. Enter a login name and password in the appropriate text boxes, or
request that the driver prompt for them when connecting to a wireless network.
key in the text box.
WEP
is selected in the Privacy Mode list box, and
- " was not selected in the Protocol section, the "Password"
TLS
Configuration" window appears.
802.1x
20
x is selected in
802.1