ActionTec AU802C User Manual page 7

4. When the following screen appears, click Finish to continue.
5. Once the Installation is complete, from the Windows Desktop click on the
V
Access Point Locator Icon.
Note: The Access Point Locator allows the end user to identify the IP address of
the Access Point as an aid to Adjusting the Access Point's
network address values, we reccommend keeping the factory defaults.
6. The Access Point Locator will scan for any available Access Points and
display their information.
7. If you wish to change the factory defaul values, click on the configure icon.
Note: Make sure you record the current IP settings prior to changing the current
configuration.
12
Configuring the Actiontec 54 Mbps Wireless Access Point
When the following screen appears, enter the appropriate values and
8.
click Apply.
9. If you are not sure of the IP addressvalues, you can click on the Auto
IP Icon. This will configure the Access Point properly.
Note: Make sure you record the IP settings assigned by the Auto IP function.
We reccommend keeping the factory defaults if you are not sure
10. Once completed, click on the Internet Explorer Icon on the Access
Point Locator Window in order to adjust the Access Point Settings
using the Web Interface
.
Note: The Access Point can also be adjusted manually by accessing it from
any browser.
Configuring the Actiontec 54 Mbps Wireless Access Point
V
13