Setting Up Static
IP Address
To communicate with a Home Plug Ethernet Adapter from a computer on the net-
work, the user may have to switch the
static
, so that the computer and the Adapter are on the same subnet.
IP
To set up static
IP
instructions.
☞
Note: The following procedures are based on the Adapter's
factory default
changed, enter the new
address.
IP
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
on a computer, select the operating system and follow the
address. If the Adapter's
IP
IP
address settings from
IP
IP
address when instructed to enter an
17
-enabled to
DHCP
address has been
5