Controls & Features - Cub Cadet Z-Force S Operator's Manual

Controls & Features
Pivot Release
Deck Lift Handle
Blade
The blade is used to push snow/dirt/gravel, etc. and can be
angled left or right and raised or lowered.
Deck Lift Handle
The deck lift handle is located on the front of the RH console, and
is used to raise and lower the blade. Depress the button on the
end of the handle and push downward to lower the blade, or pull
upward to raise the blade. When the desired height is attained,
secure the pin in the desired index hole and release the button
on the handle
Cable Lever
Blade
Pivot Release Cable Lever
The pivot release cable lever is used to change the angle of the
blade. Squeeze the trigger against the handle and push forward
on the blade pivot handle to angle the blade to the right or pull
back on the blade pivot handle to angle it to the left. Release the
handle to secure into position.
Skid Shoe (Not shown)
The skid shoes are located on the bottom of the blade and can
be adjusted up or down depending on the conditions. The skid
shoes set the distance between the ground and the bottom of
the blade.
Shave Plate
The shave plate maintains contact with the pavement as the
blade is pushed forward.
3
Shave Plate
11