Advertisement
Functions
NOTE
This toaster is electronically controlled and
will not operate until the toaster is plugged
into a 220–240V power outlet. Before first
use, remove any packaging material or
promotional labels attached to your toaster.
1. Insert the power plug into a 220–240V
power outlet. The Brownness Indicators
will illuminate from '0' to '6', and then align
to the selected browning setting (indicated
by the position of the Brownness Dial
and Brownness Indicators). The toaster
will revert to stand-by mode (Brownness
Indicators will dim) after a few minutes if
a button is not pressed or the dial is not
adjusted.
NOTE
When using the toaster for the first time, we
suggest toasting on the maximum setting
without bread. The toaster may emit a
thin smoke or distinct odour on initial use.
This is normal and not detrimental to the
performance of the toaster.
2. Place bread, crumpets, bagels, etc into each
of the toasting slots. Ensure items for toasting
are not too large or too thick to fit in the
toasting slots.
3. Select the bread type in toasting slot using
the Bread Selection Ring.
8
NOTE
Various types of bread may require a
different browning setting. For example,
raisin toast and white light textured breads
require less toasting time, while heavier
textured rye breads may require more
toasting time. Changing the Bread Selection
Ring accommodates for these changes
(removes the guess work) without changing
the Brownness Selection Dial so you always
have the same browning no matter what the
bread type.
4. When using the Brownness Selection Dial,
align the needle with the desired browning
setting '0' (lightest) to '6' (darkest).
Indicators will illuminate and align to the
selected browning setting. The Brownness
setting is relative to each Bread Type so
there's no need to keep adjusting the setting
for different bread types if you have the
same brownness requirements.
NOTE
When toasting bread for the first time,
it is suggested to toast on browning setting
'3' (9 LED Indicators).
5. To start the toasting process, press the
lever down until it locks into place. The
Brownness Indicators will begin flashing
at "0" then start to gradually count up
indicating the level of brownness until it
reaches the browning setting.
6. Once the toasting cycle is complete the
carriage will move to the raised position.
Remove the toast. The brownness indicator
will re-illuminate to the previously selected
browning setting for a few minutes before
entering stand-by mode.
Advertisement
