Advertisement
About the Hooker
Electric Camera
Housing for the GoPro
When you are deep-water fishing, do
you ever wonder what's down there?
At Hooker Electric, we set out to build the ultimate deep-water
camera housing for your GoPro
laying around, so let's get some fish action!
Our goal was simple; we wanted to capture "the bite". We
began by engineering a camera housing that provides its own
light source, so that it could capture video in the dark depths
of the sea and withstand the great pressures of the deep. We
specifically designed it for deep-dropping Swordfish and other
deep water species. The Hooker Electric Camera Housing
is intended for two distinct types of fishing, chicken rigs and
daytime Swordfish rigs.
Share your videos with us or tag us
on Facebook (Hooker Electric
Reels) or Instagram
(hookerelectricreels).
®
. Most likely you have one
®
Using Your Hooker
Electric Camera Housing
Read all suggestions before using the
Hooker Electric camera housing.
DEEP-DROP
1. We suggest using a wind-on leader and attaching the
camera housing to the main line. Then attach the rig to
the lens line.
2. You may attach lights on the rig with no issues.
SWORDFISH
1. Attach the camera housing to the main wind-on leader.
We suggest using 200lb or greater.
2. Attach your bait at any length from the lens; for best
results, we suggest 8 to 12 feet from the lens.
3. We suggest using additional lights between the camera
housing and the rod.
4. DO NOT use any other objects between the camera
housing and the bait. This can cause tangles on your rig.
The Camera Housing Kit
Constructed from durable Delrin
clear Plexiglas
®
housing includes:
•
Camera housing and lens
•
O-ring seal/lubricant
•
3 AA batteries (for light source)
•
Light bulb (Available in white, blue or red)
•
Pre-rigged with 250lbs monofilament
•
Pre-rigged stainless steel braided wire
•
Carry bag
NOTE:
The Hooker Electric Camera Housing
kit DOES NOT include a GoPro® camera.
and visually
®
, the Hooker Electric camera
Advertisement
