Specifications - Sony HDR-TG1 Service Manual

These specifications are extracted from instruction
manual of HDR-TG1E/TG3E.
System
Video compression format: AVCHD (HD)/
MPEG2 (SD)/JPEG (Still images)
Audio compression format: Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Video signal: PAL color, CCIR standards
1080/50i specification
Recording format: Movie (HD): AVCHD 1080/
50i
Movie (SD): MPEG2-PS
Still image: Exif Ver.2.2*
Image device: 3.6 mm (1/5 type) CMOS sensor
Recording pixels (still image, 4:3):
Max. 4.0 mega (2 304 × 1 728) pixels*
Gross: Approx. 2 360 000 pixels
Effective (movie, 16:9): Approx. 1 430 000
pixels
Effective (still image, 16:9): Approx.
1 490 000 pixels
Effective (still image, 4:3): Approx. 1 990 000
pixels
Lens: Carl Zeiss Vario-Tessar
10 × (Optical), 20 ×, 120 × (Digital)
Focal length: F1.8 ~ 2.3
f=3.2 ~ 32.0 mm (5/32 ~ 1 5/16 in.)
When converted to a 35 mm still camera
For movies* 3 : 43 ~ 507 mm (1 3/4 ~ 20 in.)
(16:9)
For still images: 38 ~ 380 mm (1 1/2 ~ 15 in.)
(4:3)
Color temperature: [AUTO], [ONE PUSH],
[INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
Minimum illumination: 5 lx (lux) ([AUTO SLW
SHUTTR] [ON], Shutter speed 1/25 sec)
* 1 "Exif" is a file format for still images,
established by the JEITA (Japan
Electronics and Information Technology
Industries Association). Files in this
format can have additional information
such as your camcorder's setting
information at the time of recording.
* The unique pixel array of Sony's ClearVid
2
CMOS sensor and image processing
system (BIONZ) allows still image
resolution equivalent to the sizes
described.
* 3 The focal length figures are actual figures
resulting from wide angle pixel readout.
HDR-TG1/TG1E/TG3E_L2
Input/Output connectors
A/V Remote Connector: Component/video and
audio output jack
HDMI OUT jack: HDMI mini Connector
LCD screen
Image: 6.7 cm (2.7 type, aspect ratio 16:9)
Total dot number: 211 200 (960 × 220)
General
1
Power requirements: DC 6.8 V/7.2 V (battery
pack)
2
DC 8.4 V (AC Adaptor)
Average power consumption: During camera
recording using the LCD with normal
brightness:
HD: 3.3 W
SD: 2.7 W
Operating temperature: 0 °C to + 40 °C (32 °F to
104 °F)
Storage temperature: -20 °C to + 60 °C (-4 °F to +
140 °F)
Dimensions (approx.): 32 × 119 × 63 mm
(1 5/16 × 4 3/4 × 2 1/2 in.) (w/h/d)
including the projecting parts
32 × 119 × 63 mm
(1 5/16 × 4 3/4 × 2 1/2 in.) (w/h/d)
including the projecting parts, and the supplied
rechargeable battery pack attached
Mass (approx.): 240 g (8 oz) main unit only
300 g (10 oz) including the supplied
rechargeable battery pack, and a "Memory
Stick PRO Duo"
Handycam Station DCRA-C230
Input/Output connectors
A/V OUT jack: Component/video and audio
output jack
USB jack: mini-B
(HDR-TG3E: output only)
Dedicated USB Terminal Adaptor
Input/Output connectors
USB jack: mini-B
(HDR-TG3E: output only)

SPECIFICATIONS

— 2 —
ENGLISH JAPANESE
ENGLISH JAPANESE
AC Adaptor AC-L200/L200B
Power requirements: AC 100 V - 240 V, 50/60 Hz
Current consumption: 0.35 - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to + 40 °C (32 °F to
104 °F)
Storage temperature: -20 °C to + 60 °C (-4 °F to +
140 °F)
Dimensions (approx.): 48 × 29 × 81 mm
(1 15/16 × 1 3/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FH50
Maximum output voltage: DC 8.4 V
Output voltage: DC 6.8 V
Capacity: 6.1 Wh (900 mAh)
Type: Li-ion
Design and specifications are subject to change
without notice.
• Manufactured under license from Dolby
Laboratories.