Sase SC320 Instruction Manual

Sase SC320 Instruction Manual

Scarifier / shaver / planner

Advertisement

Quick Links

SASE
Instruction manual
(USA)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC320 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sase SC320

  • Page 1 SASE Instruction manual (USA)
  • Page 2 Instruc on manual SC320 SASE Declaration of Conformity according to EN ISO/IEC 17050-1 EC-Declaration of Conformity Month.Year: For the machine described below Product denomination: Floor Planer Model: SC 320 Serial number: Herewith we declare, that the machine is complying with all the essential requirements of the Machine Directive 2006/42/EC of the EUROPEAN PARLIAMENT of the 17th of Mai 2006 The person authorized to compile the relevant technical documentation (According to Appendix II Nr.
  • Page 3: Machine Applications

    Instruction manual SC320 SASE 2. Machine applications Planing of horizontal, dry floors such as concrete and steel surfaces with or without a coating ® and asphalt using SASE planing tools. The use of the machine outside is only possible in dry weather.
  • Page 4: Applications Of The Tools

    Instruction manual SC320 SASE 4. Applications of the tools e t t , y t oncrete texturing, scabbling, planing and grooving applications. Also used for removal of road markings, roof chippings and brittle coatings i l l e t t...
  • Page 5: Changing The Drum

    Instruction manual SC320 SASE 6. Operating a. After mounting the appropriate tools the operation of the planer can begin. b. The lever of the height adjustment (Appendix diagram No. 97 and 99) has to be in the upper position before the machine is switched on. The hand wheel of the height adjustment must also be turned anti-clockwise as far as possible.
  • Page 6: Maintenance And Cleaning

    Instruction manual SC320 SASE 8. Adjusting the drum During the operation of the SC 320 floor planer or after a drum has been changed or replaced, the drum shaft and the rear wheel axis can fall out of alignment. This results in an uneven track on the floor.
  • Page 7: Belt Drive

    Instruction manual SC320 SASE 9.3 Belt drive Check the belt after approximately every 30 hours of operation. The belt is tensioned automatically by a tensioner wheel underneath the belt cover. 9.4 Cleaning A regular cleaning of the machine increases the life of all components and tools of the planer.

Table of Contents