Download Print this page

Fiat BRAVO Owner's Handbook Manual page 202

Hide thumbs Also See for BRAVO:

Advertisement

With gas discharge bulbs (Bi-Xenon)
GETTING TO KNOW
(for versions/markets, where provided)
YOUR CAR
Due to the high power supply voltage,
gas discharge bulbs (Bi-Xenon) should
SAFETY
only be replaced by specialised personnel:
danger of death! Contact a Fiat Dealership.
STARTING AND
SIDE LIGHTS
DRIVING
To change the bulb, proceed as follows:
❒ remove the protective cover A fig. 157;
WARNING LIGHTS
❒ turn the bulb holder A fig. 159 anticlockwise and
AND MESSAGES
remove it;
❒ remove the bulb B and replace it;
❒ refit the new bulb, put the bulb holder A fig. 159
IN AN
back into place and then refit the protective
EMERGENCY
cover B fig. 157 properly.
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 159
198
WARNING
F0Q0706
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protective cover A fig. 157;
❒ release the bulb holding clip A fig. 160;
❒ remove bulb C and replace it;
❒ fit the new bulb, ensuring that the outline of the
metal part coincides with the splining on the
curve of the headlight. Then reconnect the
electrical connector B and reattach the bulb
holding clip A;
❒ refit the protective cover B fig. 157.
fig. 160
F0Q0707

Advertisement

loading