Download Print this page

Fiat BRAVO Owner's Handbook Manual page 114

Hide thumbs Also See for BRAVO:

Advertisement

GETTING TO
If the space-saver wheel is used, the
KNOW YOUR CAR
ESP system keeps operating. Always
remember that the space-saver wheel, being
smaller than the original wheel provides less
SAFETY
grip. For the correct operation of the ESP and
ASR systems it is vital that the tyres are the
same make and the same type on all the
wheels, in perfect condition and, above all, the
STARTING AND
prescribed type, make and size.
DRIVING
ASR SYSTEM (Antislip Regulation)
WARNING LIGHTS
AND MESSAGES
This is integral to the ESP system and automatically
intervenes if one or both drive wheels slip, helping
the driver to control the car.
Depending on the slipping conditions, two different
IN AN EMERGENCY
control systems are activated:
❒ if the slipping involves both drive wheels, the ASR
intervenes reducing the power transmitted by the
SERVICING AND
engine;
MAINTENANCE
❒ if the slipping only involves one of the drive
wheels, the ASR intervenes automatically braking
the wheel that is slipping.
TECHNICAL
SPECIFICATIONS
The action of the ASR system is particularly helpful
in the following circumstances:
❒ slipping of the inner wheel on bends due to
dynamic variations in the load or excessive
INDEX
acceleration;
110
WARNING
❒ excessive power transmitted to the wheels, also
in relation to road surface conditions;
❒ acceleration on slippery, snowy or icy road
surfaces;
❒ loss of grip on wet road surfaces (aquaplaning).
MSR SYSTEM (ENGINE DRIVE
REGULATION)
This is an integral part of the ASR system that, in
the event of a sudden gear downshifting, cuts in and
provides torque to the engine thus preventing
excessive drive wheel drive which, especially in
poor grip conditions, can lead to loss of stability.
ENGAGEMENT/DISENGAGEMENT OF THE
ASR SYSTEM
The ASR system switches on automatically each
time the engine is started.
When the system is active, a message is shown on
the display (see "Warning lights and messages"
chapter).
Whilst driving, the ASR can be deactivated and
subsequently activated again by pressing the ASR
OFF button on the dashboard, next to the steering
wheel.
Whilst driving, the ASR can be switched off and
subsequently switched on again by pressing button
C.

Advertisement

loading