Christopher Ward C7 Apex Limited Edition Owner's Handbook Manual page 8

How to operate your C7 Apex Limited Edition
The crown should sit flush to the case (position 1)
in order to maintain water resistance. To re-power
the watch after a period of non-use, simply wind the
crown in a clockwise direction. Your C7 Apex Limited
edition has a maximum power reserve of 5 days
(120 hours) when fully wound.
Take care not to overwind the crown past the point
of resistance as it will damage the movement.
• Pull gently into position 2. For rapid date
correction, turn in an anti-clockwise direction.
• Pull gently into position 3. This position is used
for handsetting and stopping of the second hand.
For precise time setting it is recommended
to pass beyond the desired minute and to set
the hand backwards.
PLEASE NOTE: Date correction should not be
carried out between 20.00 hr and 02.00 hr
as the watch gearing will already be aligning
itself to change the date. The crown should always
be pushed in after adjustment, and it is best to
do so from position 3 to avoid advancing beyond
the desired date.
7