InTroduCTIon TIme on Your sIde... Your Christopher Ward watch has been designed and engineered by highly talented craftspeople Contents to ensure not only accurate and precise timekeeping but also to bring a real pride of C11 MsL CoLLeCtIon 2–3 ownership that only luxury items of the highest C11 MsL AutoMAtIC quality can ever hope to deliver.
C11 msL CoLLeCTIon The clean image of a modern jet’s altimeter has been the primary inspiration for the C11 msL Collection. The result is one of the most attractive conversions from an altimeter to a wristwatch. Both the automatic and chronograph versions...
C11 msL AuTomATIC TeCHnICAL InFormATIon feAtures teChnICAL InforMAtIon – swiss made diameter: 42mm Height: 10.8mm – *25 or 26 jewel swiss mechanical movement Weight: 105g – self winding (automatic) Calibre: *eTA 2824-2 or sellita sW200-1 – date indicator Case: 316L stainless steel –...
InsTruCTIons dIspLAY And ConTroL BuTTons The C11 msL Automatic has a maximum (a minimum) of 20 revolutions. normal wearing power reserve of 38 hours when fully wound. will very quickly allow the rotor to start re- To re-power the watch after a period of non-...
operATIng InsTruCTIons seTTIng THe TIme/dATe • position is for winding in power. Wind in a clockwise direction to re-power the watch. • pull gently into position . For rapid date correction, turn in a clockwise direction. • pull gently into position .
operATIng InsTruCTIons dIspLAY And ConTroL BuTTons dIspLAy eLeMents ControL Buttons minute hand push-button A second counter Hour hand Crown minute counter Centre stop-second Hour counter push-button B date window...
operATIng InsTruCTIons seTTIng THe TIme • pull out the crown to position (the watch stops). • Turn the crown until you reach the correct time e.g. 08.45 hr. • push the crown back into position The crown should fit flush to the case.
Page 13
operATIng InsTruCTIons seTTIng dATe (quICK mode) • pull out the crown to position (the watch continues to run). • Turn the crown clockwise until the correct date appears. • pull the crown to position push the crown back into position until flush with the case.
Page 14
operATIng InsTruCTIons seTTIng THe dATe/TIme Example: date / time on the watch: 2nd / 01.25 hr present date / time: 29th / 21.30 hr • pull out the crown to position (the watch continues to run). • Turn the crown clockwise until yesterday’s date appears ie.
Page 15
operATIng InsTruCTIons • pull out the crown to position (the watch stops). • Turn the crown clockwise until the correct date ie. 29th appears (after passing through midnight). • Continue to turn the crown until the correct time 21.30 hr appears. •...
operATIng InsTruCTIons CHronogrApH FunCTIons: dIspLAy eLeMents ControL Buttons second counter push-button A (start / stop) minute counter Centre stop-second Hour counter push-button B (reset) • The minute counter measures pLeAse noTe: Before using the chronograph 30 minutes per rotation. functions, please ensure that: •...
operATIng InsTruCTIons BAsIC FunCTIons push-button A (stArt / stop / reset) Example: Start: press push-button A. Stop: to stop the timing, press push-button A once more and read the 3 chronograph counters: 2 hours / 20 mins / 33 secs. Zero positioning: press push-button B.
Page 19
operATIng InsTruCTIons ACCumuLATed TImIng push-button A Example: Start: (start timing). Stop: (e.g. 15 min 5 sec following Restart: (timing is resumed). Stop: (e.g. 13 min 5 sec following = 28 min 10 sec (accumulated measured time is shown) Reset: The 3 chronograph hands are returned to their zero positions.
Page 20
operATIng InsTruCTIons InTermedIATe or InTerVAL TImIng push-button A Example: Start: (start timing). Display interval: e.g. 10 minutes 10 seconds (timing continues in the background). Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time). Stop: (final time is displayed).
Page 21
operATIng InsTruCTIons AdjusTIng CHronogrApH HAnds To zero posITIon Example: one or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). • pull out the crown to position (all three chronograph hands are in their correct or incorrect zero position).
Page 22
operATIng InsTruCTIons AdjusTIng CHronogrApH HAnds To zero posITIon Adjusting the centre stop second single step 1 x short Continuous long When correct press button B to set. Corrective mode for the 1/10 second counter is now activated. Adjusting the 1/10 second counter hand (position 6h) single step 1 x short Continuous...
operATIng InsTruCTIons WATer resIsTAnCe 1 ATM (10 Metres) safe to wear your watch while washing your hands with tap water. Although your watch has been through vigorous 3 ATM (30 Metres) static pressure testing, it is worth remembering Washing your car and/or general that there are many variables that can affect hose pipe usage.
CITes approved farms in Louisiana. your Christopher Ward strap or bracelet. LeAther strAp WIth eAsy reLeAse ButterfLy CLAsp 1. Locate the clasp 2. press the quick-release 3.
Page 26
operATIng InsTruCTIons BrACeLet WIth MICro-AdJustMent 1. press to release micro Adjust 2. expand adjustment 3. Adjust pin position 4. Close the clasp dIVer’s eXtensIon (Where AppLICABLe) 1. press to release press diver’s extension 2. expand adjustment 3. Adjust pin position 4.
Christopher Ward watch has the potential to become an heirloom piece giving further joy to future generations. It’s for this reason we have created our industry leading approach to after-sales care which we term the CW360 Watch care programme.
Page 28
Care programme is designed to our success depends on you being completely happy with your new Christopher Ward watch. If for any reason you aren’t, you have deliver you complete peace of up to 60 days to return your watch, absolutely free of charge, mind and the best support possible and receive a replacement or full refund by return –...
InFormATIon KeepIng In TouCH WITH CHrIsTopHer WArd From small beginnings just a few short years ago As the owner of a Christopher Ward watch, (our first workshop was actually a refurbished if ever you need to get hold of us we are at chicken shed!), Christopher Ward has won a your service.
Page 30
Cer t ifiCate o f aU tH ent iC i tY MoDeL SeRiAL nUMBeR DAte CheCKeD christopherward.co.uk Christopher Ward (London) Limited, 1 Park Street, Maidenhead Berkshire SL6 iSL United Kingdom...
Page 31
Head Office Christopher Ward (London) Limited, 1 Park Street, Maidenhead, Berkshire SL6 1SL United Kingdom +44 (0)1628 763040 custOmer services +44 (0)844 875 1515 United KingdoM: 1.877.226.8224 United StateS of aMeriCa: customerservices@christopherward.co.uk technical@christopherward.co.uk Website www.christopherward.co.uk www.christopherward-usa.com...