Gehl Dynalift DL Series Operator's Manual page 9

PRE-DELIVERY
The following Checklist is an important reminder of the
inspections that MUST be made before delivering the
Telescopic Handler to the customer. Check off each item
after the prescribed action is taken.
Check that:
NO parts of machine have been damaged in shipment.
Check for such things as dents and loose or missing parts;
correct or replace components as required.
Battery is securely mounted and not cracked. Cable con-
nections are tight. Electrolyte at proper level.
Cylinders, hoses and fittings are not damaged, leaking or
loosely secured.
Oil, fuel and air filters are not damaged, leaking or loosely
secured.
All grease fittings have been properly lubricated and no fit-
tings are missing; see Lubrication chapter of this manual.
Wheel nuts are torqued to 450 ft.-lbs. (610 Nm).
Tires are inflated to 70 psi (480 kPa) cold.
Hydraulic system reservoir, engine crankcase, engine
coolant, transfer case, transmission and axles are filled to
the proper operating fluid levels.
All adjustments have been made to comply with the set-
tings in this manual and in the separate engine manual.
All guards, shields and decals are in place and securely
attached.
Model and serial number for this unit is recorded in space
provided on this page and page 1.
Start the machine and test-run the unit while
checking that proper operation is exhibited by all
controls.
Check that:
All indicators (lamps, switches, etc.) function properly.
All hand and foot controls operate properly.
The PWP System operates properly (if equipped). Refer to
Service and Storage chapter for the procedure to check the
PWP System.
®
Boom, Dynattach or Dynacarrier
and frame level control all function properly.
No hydraulic system leaks when under pressure.
Listen for abnormal noises or vibrations; if detected, deter-
mine their cause and repair as necessary.
PRINTED IN U.S.A.
Chapter 3
CHECKLISTS
I acknowledge that the pre-delivery procedures were per-
formed on this unit as outlined above.
The following Checklist is a reminder of the important infor-
mation that MUST be passed on to the customer at the time
the unit is delivered. Check off each item as it is explained
to the customer.
®
with attachment tool
(Dealer's File Copy - Remove at Perforation)
7
Dealership's Name
Dealer Representative's Name
Date Checklist Filled Out
Machine Model No. Machine Serial No.
DELIVERY
Check that:
Review with the customer the contents of this manual and
the AEM Safety Manual and for the following:
The Index at the back, for quickly locating topics;
The Safety, Indicators and Controls, and Operation and
Adjustments chapters for information regarding safe use of
the machine.
The Lubrication and Service and Storage chapters for
information regarding proper maintenance of the machine.
Explain that regular lubrication and maintenance are
required for continued safe operation and long life.
Give this Operator's Manual and the AEM Safety Manual
to the customer and instruct them to be sure to read and
completely understand their contents before operating the
unit.
Remind the customer of U.S. OSHA regulation 1910.178
(l), which specifies operator training requirements.
Explain that the customer MUST consult the engine manu-
al (provided) for related specifications, operating adjust-
ments and maintenance instructions.
Completely fill out the Owner's Registration, including
customer's signature, and return it to the Company.
Explain that a copy of the warranty is included on the
inside back cover of this Operator's Manual.
Customer's Signature
Date Delivered
Engine Serial No.
913287/BP0808
Courtesy of Crane.Market