Host If Connector - LAPIS Semiconductor ML630Q791 Hardware Manual

3.2. The switching of ML630Q791 SDK Board
3.2.1. Reset switch
The RESET_N pin of ML630Q791 connects to the Reset switch and nSRST pin of the Debug connector.
Pressing this switch, ML630Q791 is reset and the debugger detects that the reset is asserted.
3.2.2. Power supply switch
The Power supply switch controls the power supply supplied to the CPU board.
expansion
port
HOST IF
connector
Setting
ON
OFF
FEBL630Q791-01
POW_SW
A1
ON
C1
C2
C3
1
Table 3-3 the power supply switch
The power supply of the CPU board is turned on.
The power supply of the CPU board is turned off.
ML630Q791 SDK Board Hardware Manual
regulator
5V to 1.8V
regulator
5V to 2.8V
Explanation
Chapter 3 Setting
VDD
ML630Q791
sensors
3-2