Climatic™ Parameters - Lennox FLEXY FC 050 Series Installation - Operating & Maintenance Manuel

P P P P P AR ARAMETR AR AR AR AMETRAGE CLIMA AMETR AMETR AMETR AGE CLIMA AGE CLIMA AGE CLIMA AGE CLIMATIC™
ON - OFF
The unit is declared On if set point 6 (C06) is ON.
The unit can be stopped by a remote control command
by hard contact.
On KP12 extension card - see chapter on BMS contact
kit.
For certain configurations a CLIMATIC™ system
actuator can be used to control an external function
(option: Client).
The Client option is declared On if set point 7 (C07) is
ON.
DEFINITION OF TIME SLOT PARAMETERS
The CLIMATIC™ allows you to programme 5 operating
zones per day, in addition to an idle zone for the
weekend.
Slot activation is :
- automatically controlled by the CLIMATIC™, if
you have defined these time parameters for each
slot
- forced manually by action on the controller
(instructions 02/03 and 04 for KP02).
- forced by the BMS contacts kit ( see this chapter).
- forced by the computer connection.
0 1 2 3 4
Vendredi 22h.
With the KP07 :
- Go directly to the screen concerning the time slot
to be modified, enter the parameters described
below on the screen (see organisation of screens
in KP07chapter).
Page 52 - IOM / ROOF-TOP FLEXY™ Series
TIC™ TIC™ TIC™ TIC™
5 6 7 8 9 10
The five available time slots are :
WEEK-END
NIGHT
MORNING
NOON
EVENING
If none of the time slots listed above is active, the
active slot is :
DAY
A particular time slot :
BMS is activated if the unit is connected
to a computer network.
11 12 13 14 15 16
With the KP02 :
- The slot to be set up must first be defined by the
08 instruction. Enter the information below then
return to the 08 instruction to go to the next slot.
17 18 19 20 21 22
Lundi 8h.
23 24