First Use - TECHWOOD TMM-8001 Instruction Manual

Table of Contents

Advertisement

FUNCTIONS LOCATION
1. Whip eject button
2. 5-speed power dimmer
3. Turbo function key
4. Hand mixer
5. Whisk
6. Beater
 

FIRST USE

Before first use, remove the unit and all accessories carefully and paying attention
to the sharp accessories.
Clean with soap and water, bowls and all accessories. Rinse and dry thoroughly.
Clean the outside of the machine cabinet with a damp cloth and wipe dry.
FIXING ACCESSORIES KNEADING / WHIPPING
Push the two beaters or kneaders lightly pressing the lower part until it clicks.
Warning: The whip wearing a ring must be inserted into the opening of the mixer
which is designed around a large round !
USE
• Fully unwind the power cord.
• Check that the voltage in the country where you are is indicated on the device.
• Connect the equipment into an outlet in good condition, (grounded if the device
is Class I), to avoid any danger.
• Disconnect the power cable from the power supply before any cleaning
maintenance and mounting accessories.
• Depending on the case, always place the unit on a table or flat surface horizontal
and stable.
• Do not modify in any way the device.
• The appliance must not be left unattended when it is connected to the main
supply.
• The appliance must not be used if it is dropped or if it has visible signs of
damage or leaks.
• This appliance is intended for domestic use.
1. Ensure that the gear selector is on "off." position.
2. Immerse mixers or whips in food.
3. Set the desired speed using the speed selector.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tmm-8009

Table of Contents