TECHWOOD TMM-8001 Instruction Manual page 7

● Unroll the power cord completely.
● Check that the tension in force in the country where you are
corresponds to that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and
connected to the ground if the unit is Class I), to avoid any
danger.
● Disconnect the power source cable before any operation of
cleaning of maintenance and accessories assembly.
● Never modify the appliance in anyway.
SPECIAL WARNING FOR FOOD PROCESSOR, HAND
● Always disconnect from power supply if it is left unattended
and before assembling, disassembling or during cleaning.
● Switch off the appliance and disconnect from supply before
changing accessories approaching parts that move in use.
● Potential injuries can occur with misuse. Care shall be taken
when handling the sharp cutting blades, emptying the bowl
and during cleaning, as they are extremely sharp.
● Regarding the instructions for cleaning surfaces in contact
with food or oil, thanks to refer to the below paragraph
"cleaning and maintenance" in manual.
● Regarding the instructions for the use of accessories,
operation times and speed settings, refer to the below
paragraphs.
● Do not use the appliance more than 5 minutes continuously,
rest it for at least 5 minutes between 2 uses.
COMPLEMENT WARNING
MIXER
7