TECHWOOD TBLI-1060 Instruction Manual page 5

The item must not be left unattended when it is connected to

main supply.
The item is not to be used, if it has been dropped or if there

are visible signs of damage or if it is leaking.
This appliance is only intended for household use.

 Switch off the appliance and disconnect from supply before
changing accessories or approaching parts that move in use.
 Potential injuries can occur with misuse. Care shall be taken
when handling the sharp cutting blades, emptying the bowl
and during cleaning, as they are extremely sharp.
 Regarding the instructions for cleaning surfaces in contact
with food or oil, thanks to refer to the below paragraph "
CLEANING AND MAINTENANCE " in manual.
 Regarding the instructions for the use of accessories,
operation times and speed settings, refer to the below
paragraphs.
 The blades are sharp. Take all necessary precautions.
 To mix liquids, especially hot liquids, it is advisable to proceed
in small quantities, at the same time, to avoid overflowing.
Never fill above half of the bowl.
 Do not leave cooking utensils in the container during mixing
and even only when the appliance is not in use.
 Never use products or liquids hotter than 80 ° C (or 127 ° F)
 After a maximum of 2 minute continuously, the blender should
cool for at least one minute to avoid overheating. After 2
cycles, allow the blender to rest for at least 10 minutes before
reuse.
 Repairs must only be carried out by an authorized repairer.
THIS PRODUCT IS INTENDED FOR PRIVATE HOUSE USE
ONLY.
SPECIAL WARNING FOR BLENDER
5