4.
Insert the drive into the drive bay and secure it with two screws.
5.
Connect the diskette drive cables.
5.2
5.25-inch Drives
You may install a CD-ROM, digital audio tape (DAT), hard disk, diskette drive
or any other 5.25-inch device into the drive bay.
1.
Open the front panel. See section 5 for more information on opening the
housing panel.
2.
Remove the screws attaching the 5.25-inch drive frame (2 pieces) to the
housing.
3.
Attach the drive guides on the sides of a 5.25-inch drive with two screws
on each side.
8
Installation Guide