Table of Contents
Advertisement
2.2
Installing a System Board
2.2.1
ESD Precautions
Always observe the following electrostatic discharge (ESD) precautions
before installing a system component:
1.
Do not remove a component from its anti-static packaging until you are
ready to install it.
2.
Wear a wrist grounding strap before handling electronic components.
Wrist grounding straps are available at most electronic component
stores.
2.2.2
Installation Procedures
1.
Remove the 3.5-inch drive frame from the housing by pressing the tab
on top and pivoting the frame outward.
2.
Put the housing to lying position with the open area facing upward.
6
Installation Guide
Hide quick links:
Advertisement
Table of Contents
