Temperature Adjustment - TECHWOOD TFV-189 Instruction Manual

● Unroll the power cord completely.
● Check that the tension in force in the country where you are, corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Stand the appliance on a table or flat & stable surface.
● The item must not be left unattended when it is connected to main supply.
● The item is not to be used, if it has been dropped or if there are visible signs of
damage or if it is leaking.
● Never modify the appliance in anyway.
● To avoid a circuit overload, do not operate another high wattage appliance on
the same circuit.
● When the iron is returned to its iron rest, make sure that the surface that
supports the iron rest is stable.
● The iron must be used and rested on a stable surface.
• Low temperature for fabrics - Acrylic- Nylon - Polyester - Rayon - Synthetic
• • Average Temperature for Wool - Silk
• • • High temperature for Cotton - Linen
Regardless of the temperature used, by pressing the spray button several times, the
laundry can be softened and wet for easy ironing. Always make sure there is enough
water in the tank.
By press powerful steam button, an intense shot of steam is emitted from the
soleplate. This can be very useful e.g. when removing stubborn creases.
Notes : The shot of steam facility can be used only while ironing with middle or
high ironing temperature.
By pressing the shot of steam, Powerful steam can also be applied when
holding the iron in a vertical position. This is useful for removing creases
USE

TEMPERATURE ADJUSTMENT

Spraying
Shot of steam
10