Symbols; Signal Words; Intended Use - FitEngine JTF-718E-3 Operating Instructions Manual

EN
Dear Customer,
We are delighted that you have chosen the FitEngine M-00 Exercise Bike.
If you have any questions about the device and about spare parts / accessories, contact
the customer service department via our website: www.fi t-engine.de
We hope you have a lot of fun with your FitEngine M-00 Exercise Bike.
Information About the Operating Instructions
Before using the device for the fi rst time, please read through these operating in-
structions carefully and keep them for future reference and other users. They form an
integral part of the device. The manufacturer and importer do not accept any liability if
the information in these operating instructions is not complied with.

Symbols

Danger symbols: These symbols
indicate possible dangers. Read
the associated safety notices
carefully and follow them.
Supplementary information
Read the operating instructions
before use!
Symbol for direct current
Protection class III

Signal Words

Signal words indicate hazards if the asso-
ciated notices are not followed.
WARNING – medium risk, may result in
serious injury or death
NOTICE – may result in risk of damage to
material
12

Intended Use

■ This training device is designed for
fi tness and strength training.
■ The training device is designed for a
maximum load of 100 kg.
■ Caution – the training data of this
device have a low level of accuracy.
■ This training device is not suitable for
therapeutic purposes.
■ This training device is designed exclu-
sively for use in the home.
■ The training device is intended for
personal domestic use only and is not
intended for commercial applications.
■ Only use the training device as
described in the operating instruc-
tions. Any other use is deemed to be
improper.
■ The warranty does not cover faults
caused by incorrect handling, dam-
age or attempted repairs. The same
applies to normal wear and tear.