Acer 12000 User Manual page 15

3. Carefully lift up and remove the Pentium II Xeon processor.
1.6.4 Installing and Removing the Terminator
Board
When you are not using all the Slot 2 sockets, you must install a
terminator board into each empty slot.
To install the terminator board:
1. Position the terminator board over the empty slot.
2. Carefully insert the golden fingers of the terminator board into the
slot until the board fits completely.
O
Figure 1-10 Installing a Terminator Board
3. Use the retention mechanism cover to secure the processor by
pressing it down until it locks with the retention mechanism. See
figure 1-6 for the illustration.
System Board 1-15