Product Description, Strain Relief Zse90 - OBO Bettermann ZSE90 Mounting Instructions

Product description, strain relief ZSE90

Type Cable installation
Type ZSE90-... Direct wall mounting with
- Cable spacer clips
- With profile rails and clamp clips
- With vertical ladders and clamp clips
Type ZSE90-... L Direct wall mounting with
- Cable spacer clips
- With profile rails and clamp clips
- With vertical ladders and clamp clips
Type ZSE90-... LH - With clamp clips on suspended
vertical ladder
6 | EN
2 Product description, strain relief ZSE90
2 1 Basic principles
The ZSE90 strain relief is available in 3 versions (ZSE90-.../ZSE90-...L/
ZSE90-...LH) and different sizes. They basically consist of a non-com-
bustible housing, a filler and fastening material. The strain relief can be
mounted either directly on the wall, on profile rails, on vertical ladder
rungs and vertical ladder rails. Depending on the type of strain relief,
the filling material can consist of mineral fibre plates/mineral wool, PY-
ROPLUG Block foam blocks and/or PYROSIT
®
The fastening material contained in the scope of delivery, consisting of
threaded rods, slide nuts, nuts and washers, is suitable for any possible
housing mounting.
The housing can be fastened at different points, depending on the type of
strain relief and type and scope of the cable installation.
Overview, ZSE 90 strain relief:
Installation examples:
Fig 1: ZSE90-... /ZSE90-...L strain relief for cable installation with cable spacer
clips
Housing fastening
- Directly on the wall
- On profile rails
- On vertical ladder rungs
- Directly on the wall
- On profile rails
- On vertical ladder rungs
- On vertical ladder rails
NG fire protection foam.
®
Filling
Mineral fibre plate/
mineral wool
- PYROSIT NG fire
®
protection foam
- PYROPLUG Block
®
foam block
- PYROSIT NG fire
®
protection foam
OBO Bettermann