Fastening The Housing On The Wall - OBO Bettermann ZSE90 Mounting Instructions

Mounting the product
CAUTION
16 | EN
4 3

Fastening the housing on the wall

Function loss!
The strain relief function can be restricted if the housing is not positioned
centrally over cable spacer clips, profile rails or vertical ladder rungs.
Drill the drill holes in the wall in a line with cable spacer clips, profile rails
or vertical ladder rungs.
Fig 11: Fastening threaded rods on the wall
1. Apply the drilling spacing to the wall.
2. Drill anchor holes of a 6 mm diameter and drill hole depth ≥ 65 mm.
3. Turn in the bolt ties.
4. Screw the connection sleeves to the bolt ties.
5. Screw the threaded rods into the connection sleeves.
OBO Bettermann