Advertisement
Programming A Standard Back-Lit Remote
Amino A140, A540, A130
*Note* Santel remotes generally come pre-programmed for all
oval-shaped Amino boxes.
1) Press & Release "STB" button.
2) Press & Hold "Setup" button until the "STB" button blinks
3 times (may take 3-5 seconds).
3) Press #'s in sequence: 1-8-9-8.
4) Verify Channel +/-, Guide, Menu buttons are working.
Innovative Systems IS-5112w
1) Press & Release "STB" button.
2) Press & Hold "Setup" button until the "STB" button blinks 3 times (may take 3-5 seconds).
3) Press #'s in sequence: 1-3-7-6.
4) Verify Channel +/-, Guide, Menu buttons are working.
Amino Kamai 7X/7B
1) Press & Release "STB" button.
2) Press & Hold the "Setup" button and the # "7" button at the same time until the STB button
blinks twice (may take 3-5 seconds).
3) Verify Channel +/-, Guide, Menu buttons are working.
*NOTE* Some remotes may have issues programming correctly to this model. Please call our
office if issues arise.
To Santel Set-Top-Boxes
*Note* "S.T.B." sticker may
or may not be present or in
the spot shown!*
Advertisement
Table of Contents
Related Manuals for Santel Amino A140
Summary of Contents for Santel Amino A140
- Page 1 Programming A Standard Back-Lit Remote To Santel Set-Top-Boxes Amino A140, A540, A130 *Note* Santel remotes generally come pre-programmed for all oval-shaped Amino boxes. 1) Press & Release “STB” button. 2) Press & Hold “Setup” button until the “STB” button blinks 3 times (may take 3-5 seconds).
- Page 2 SANTEL REMOTE CONTROL PROGRAMMING 1. Turn on the TV. 2. On the Santel remote control, press & release the “TV” button once; it will blink once. 3. Press and hold “SETUP” until the “TV” button blinks twice (may take a few seconds) 4.
Need help?
Do you have a question about the Amino A140 and is the answer not in the manual?
Questions and answers