Page 1
Roma Cot Instructions IMPORTANT! RETAIN FOR FUTURE REFERENCE. READ CAREFULLY...
Page 2
Welcome Thank you for choosing a Babies R Us product. The Roma cot is carefully designed for baby’s safety and features an adjustable height base and drop side so you can easily reach baby in the early months and teething rails to protect the top rails of the sides from sharp teeth.
Page 3
Parts list (Not to scale) Please retain all packaging until you are certain no parts are missing. In the case of assembly difficulties, missing parts or other queries, please contact your nearest Babies R Us store. After assembly, please dispose of all packaging carefully. A medium sized flat bladed screwdriver is required for assembly of the cot.
Page 4
Fixed side Attach the fixed side to both ends using two short bolts for each side. Ensure that the plastic teething rail is at the top. Do not fully tighten the fixed side bolts at this stage. Page 3...
Page 5
Dropside Ensuring that the plastic teething rail is at the top, fit the dropside into the guides in each end panel and slide upwards until it stops. Page 4...
Page 6
Base Carefully tip the cot over on to its drop side. Position the base at the preferred height, 1, 2 or 3 and insert the long bolts part way to stop it moving. Insert two barrel nuts into the holes in one corner of the base and align the slots with the bolts. Once aligned, screw the bolts into the barrel nuts, but do not fully tighten at this stage.
Page 7
Dropside operation To lower the drop side: 1. Lift the side slightly 2. Press the bottom rail towards the base with your lower leg 3. Lower the side slowly until it stops To raise the drop side: Lift the drop side until both ends click into the catches and check the side is secure before leaving it.
Page 8
Care of your product Regularly check the tightness of bolts and tighten as necessary. Check for damage which could render your cot unsafe or cause splinters. To clean use a damp cloth, avoiding the use of strong detergents or abrasives. An occasional light application of a wax polish will help maintain a good appearance and will aid operation of the dropside.
Need help?
Do you have a question about the Roma Cot and is the answer not in the manual?
Questions and answers