Hunter APP-100 Manual

Hunter APP-100 Manual

Gps dog tracker

Advertisement

GPS Dog Tracker APP-100 Manual
Deactivate the PIN and any call transfer; the telephone number of the SIM card should be displayed (not withheld) and activate the GPRS
on the SIM card.
Unscrew the two screws carefully, with the screwdriver provided in the package. Make sure to always use the screwdriver provided. Open
the plastic cover carefully, by paying attention to the battery wires and insert the SIM card as shown on the photo above. Then, close tight
the plastic cover and screw the two screws. Make sure you close the plastic cover tight so the tracker is waterproof.
CHARGING PROCCESS
CHARGING COMPLETE
LOW BATTERY INDICATION
ACTIVATION/ TURNING ON
DEACTIVATION/ TURNING OFF
SEARCHING GSM
CONNECTING TO GSM
CONNECTING TO GPRS
CONNECTING TO GPS
SLEEP MODE
RESET MODE
SEND SMS
DEVICE REPLY
MAKE A CALL
SEND SMS
DEVICE REPLY
SEND SMS TO GET LOCATION
DEVICE REPLY
SEND SMS TO GET MULTIPLE LOCATIONS
DEVICE REPLY
DEVICE SENDS
SIM card Installation
LED CODE
LED STARTS FLASHING FAST FEW SECS AFTER CONNECTED TO CHARGER
LED TURNS ON CONTINUOUSLY
LED FLASHES SLOWLY 1 SEC ON / 1 SEC OFF
LED FLASHES FAST AND ACCELARATING 5 TIMES
LED FLASHES DECELARATING 5-6 TIMES
FLASHES EVERY 64ms ON / 800ms OFF
FLASHES EVERY 64ms ON / 3000ms OFF
FLASHES EVERY 64ms ON / 300ms OFF
FLASHES EVERY 64ms ON / 200ms OFF
FLASHES ONCE EVERY 30 SEC
FLASHES 5-6 TIMES RANDOMLY THEN TRIES TO RECONNECT
GOOGLE LINK FUNCTION
FACID, 123456, AUTHORIZE, 1=+(COUNTRY CODE PHONE NO)
FACID authorize ok! 5 nums updated
DEVICE REPLIES WITH A GOOGLE LINK SMS
http://maps.google.com/maps?
SMS FUNCTION
FACID,123456,AUTHORIZE,1=+(COUNTRY CODE PHONE NO)
FACID authorize ok! 5 nums updated
FACID,123456,SMS,FAST
lat:50.123456N,long:49.123456E,SP:0.00,HD:000.00,10/02/1 6,09:40:13,GPS:10,b=86%,Nil-Alarms
FACID,123456,LOC,I=240,T=04;
FACID loc ok! I=240, T=04;
LOCATION SMS EVERY 240 SEC, 4 TIMES, THEN STOPS
Copyright by Hunter Electronics Limited. All Rights Reserved

Advertisement

Table of Contents
loading

Summary of Contents for Hunter APP-100

  • Page 1 SEND SMS TO GET LOCATION FACID,123456,SMS,FAST DEVICE REPLY lat:50.123456N,long:49.123456E,SP:0.00,HD:000.00,10/02/1 6,09:40:13,GPS:10,b=86%,Nil-Alarms SEND SMS TO GET MULTIPLE LOCATIONS FACID,123456,LOC,I=240,T=04; DEVICE REPLY FACID loc ok! I=240, T=04; DEVICE SENDS LOCATION SMS EVERY 240 SEC, 4 TIMES, THEN STOPS Copyright by Hunter Electronics Limited. All Rights Reserved...
  • Page 2: Gprs Function

    LED is on continuously. After charging is complete, disconnect the charger and lower down the orange protective cover. activated. The battery autonomy is max 400 hours, depending on the setting of the auto report function. Copyright by Hunter Electronics Limited. All Rights Reserved...
  • Page 3: Time Zone Setting

    In order to change the default password (123456) of the tracker to 123 for example, send the following SMS command to the tracker: FACID,123456,PASSWORD,V=123; V is the value for the new password. The tracker replies back “FACID password ok!” Then, send the SMS commands to the tracker as FACID,123, etc. Copyright by Hunter Electronics Limited. All Rights Reserved...
  • Page 4: Vibration Alarm

    At the end of the SMS is written GO which means GEO-FENCE OUT. The tracker moved out of the geo-fence area. lat:50.123456N,long:49.123456E,SP:0.00,10/12/14,094013.000,GPS:10,b=86%,GI At the end of the SMS is written GI which means GEO-FENCE IN. The tracker moved in the geo-fence area. Copyright by Hunter Electronics Limited. All Rights Reserved...
  • Page 5 After the installation of the application, go to the menu of the Android mobile phone where the applications are shown, and click on the Hunter Software application. Then, a login screen appears, write the username and password provided by us.
  • Page 6: Login Screen

    LOGIN SCREEN After registering, you can Login with your e-mail and your password. MANAGE DEVICES Copyright by Hunter Electronics Limited. All Rights Reserved...
  • Page 7 By pressing Manage Devices you can add the trackers. The Device Setup Commands Password is: a123456 Send the Query Command to obtain the IMEI. By pressing dog's head, you can view info regarding the distance, coordinates etc. Copyright by Hunter Electronics Limited. All Rights Reserved...
  • Page 8: Add Location

    ADD LOCATION On Add Location, you can save your locations. COMMANDS On Send Commands section, you choose Interval Time and Repeat. Copyright by Hunter Electronics Limited. All Rights Reserved...
  • Page 9 - Register the tracker to the application. Warranty: The tracker has one-year warranty. Damages caused by mechanical stress, any damages on the belt and failure of the built-in rechargeable battery, are not covered by the warranty. Copyright by Hunter Electronics Limited. All Rights Reserved...

Table of Contents