Advertisement
Introduction
The door opening detector DOF13 is designed to be used with at least one Jenile's
flash device or vibrator.
The door opening detector is composed of two items: one detector and one
magnet. The two items of the detector have to be fixed on doors or windows with
the magnet on one side and the detector on the other (depending on the swing
direction of the door: either on the door frame or on the door itself).
The radio-frequency pulses (433 MHZ) are transmitted wireless to the Jenile flash
receivers or vibrators.
Setting
Please refer to your Jenile flash device instruction manual to connect devices to one
another. If the connection fails, please contact our customer service department.
After the installation, the detector is automatically linked to the flash systems and to
the Jenile vibrators. Warning, if you press too long on the CBM Cube's plug, it will
be disconnected.
6
Advertisement
