Summary of Contents for Jenile DOF13
- Page 1 Door opening detector INSTRUCTION MANUAL Specially designed for deaf and hearing impaired people.
- Page 2 All your products are already connected to each other.
- Page 3 Summary : The contents of your package Door opening detector 5-11 :...
-
Page 4: The Contents Of Your Package
The contents of your package - Door opening detector - Double sided adhesive - Battery D - Manual instruction in english... -
Page 5: Technical Specifications
Door opening detector D - Magnet - Operating LED - Battery - Antenna - Double sided adhesive Technical Specifications Easy and simple to install Dimensions (height x width x depth): 67 x 37 x 12 mm Power supply: 12V battery included Battery autonomy: 6 months Transmission frequency: 433,33 Mhz Distance between each detector: 150 meters maximum in free fields... - Page 6 Introduction The door opening detector DOF13 is designed to be used with at least one Jenile’s flash device or vibrator. The door opening detector is composed of two items: one detector and one magnet. The two items of the detector have to be fixed on doors or windows with the magnet on one side and the detector on the other (depending on the swing direction of the door: either on the door frame or on the door itself).
-
Page 7: Installations
Installations The door opening detector DOF13 has to be placed indoors, vertically or horizontal- ly, on a door, a window or a bay window. The detector (the main part of the device) has to be located on a stable door jamb or window and the magnet has to be positioned on the opening and moving part of it. - Page 8 If the detector has to be installed on a PVC/aluminum door or window, it is not recommended to drill them so as to keep the isolation. Note : The detector’s LED must flash to each opening of the door or the window.
- Page 9 If it doesn’t, please check that the distance between the two items is inferior to 1 cm and/or put the main part of the device (with the battery) the other way round (180° rotation)
- Page 10 Signals and colors The Motion Detector DDM13 can be used with all the receivers from the Jenile range. If you need to be alerted to the dooropening detector, the cube, the flash plug,will turn white. The pocket vibrator has 4 vibrations with 4 repetitions...
-
Page 11: Safety And Environment
Safety & environment Please respect the use and maintenance instructions. To clean the detector, only use a soft and slightly damp cloth. Never use abrasive or corrosive products. The detector must not come into contact with any liquid. Prior to an extended period without use, please remove the battery. As a consumer, you are legally obliged to recycle used batteries. - Page 12 www.jenile.com...