Related Manuals for NimbeLink Skywire CAT1 LTE GSM
Summary of Contents for NimbeLink Skywire CAT1 LTE GSM
- Page 1 Enabling CDC_ETHER Connection for Skywire ® GSM CAT1 NimbeLink Corp Updated: February 2018 PN 30262 rev 4 © NimbeLink Corp. 2018. All rights reserved.
- Page 2 2.1 Overview 2.2 BeagleBone Black Setup 2.2 Modem Setup 2.3 Verify and Test The Connection 3 Troubleshooting 3.1 No connection in Section 2.3 3.2 Connection Stops After a Short Time PN 30262 rev 4 © NimbeLink Corp. 2018. All rights reserved.
- Page 3 Linux kernel version you have does not support CDC_ETHER. 1.4 Testing This procedure was tested on the following OSs and hardware: Hardware BeagleBone Black Rev. 3 Operating Systems Debian 8.6 (Kernel 4.4.36-ti-r72) PN 30262 rev 4 © NimbeLink Corp. 2018. All rights reserved.
- Page 4 Once connected, issue the following command: AT%PDNSET=1,"[your apn]","IP" replacing [your apn] with the APN of your SIM. For instance, if you setup your modem with a NimbeLink AT&T SIM activated on go.nimbelink.com, your APN is 10569.mcs and you would enter: AT%PDNSET=1,"10569.mcs","IP"...
- Page 5 --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 133.884/151.565/187.424/21.462 ms Your CDC_ETHER connection is now setup. PN 30262 rev 4 © NimbeLink Corp. 2018. All rights reserved.
- Page 6 AT&T Network: 10569.mcs T-Mobile Network: c1.korem2m.com Vodafone Network: vfd1.korem2m.com If the above options do not work and you signed up for service through NimbeLink, please contact us at: product.support@nimbelink.com to get your APN information. Please include your SIM ID and IMEI of your Skywire.
Need help?
Do you have a question about the Skywire CAT1 LTE GSM and is the answer not in the manual?
Questions and answers