Powering On/Off the Projector
Powering On the Projector
1. Ensure that the power cable and signal cable are securely
connected. The POWER LED will turn amber.
2. Remove the lens cap.
3. Turn on the lamp by pressing "POWER" on the control
panel or the remote control. The POWER LED will flash
green.
The startup screen will display in approximately 5 seconds.
When disappear startup screen, the POWER LED will turn
green.
4. Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
I f you connect multiple sources at the same time, use the
"SOURCE" on the remote control or use "RGB", "S-video",
"Video" on the remote control to switch inputs.
Turn on the projector
first and then the signal
sources.
Lens Cap
All manuals and user guides at all-guides.com
Installation
2
1
POWER
OR
English
English
15