Table of Contents
Advertisement
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean LCD Monitor screen;
-- Power off LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can
severely damage it.
3. Connect all cables to the back of the LCD Monitor.
4. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
5. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be
performed by an authorized technician.
6. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD
Monitor outside this range could result in permanent damage.
7. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
* LCD Monitor or the case is damaged.
Chapter 1 Installation
Unpacking
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer.
You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has
enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some
ventilation is needed to ensure that the Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
* LCD Monitor
* 1.5M Monitor-to-PC signal Cable
* 1.5M Stereo Jack Audio Cable
If you find that any of these items is missing or appears damaged, contact your dealer immediately.
Viewing Angle Adjustment
The LCD Monitor is designed to allow users to have a comfortable
viewing angle. The viewing angle can be adjusted as follows: Top
(-5°~ +15°) & Left / Right (-45° to +45°).
sWarning : Do not force the LCD Monitor over its maximum viewing angle settings as stated above.
Attempting this will result in damaging the Monitor and Monitor stand.
Detaching LCD Monitor from Its Stand
1. Remove the rear panel (1) from the monitor.
(see Fig. 1-2)
2. Remove the rear support panel (2) from the
swivel base support column.
3. Unscrew screws (3) the swivel base support
column (4).
* User's Manual
* AC Adapter
* 1.8M Power Cord
Figure 1-2
2
Figure 1-1
Advertisement
Table of Contents
