Related Manuals for K&H IN-DD18-120S
Summary of Contents for K&H IN-DD18-120S
- Page 1 User Instruction Manual Double slim induction cooker IN-DD18-120S Dimensions: 600 x 375mm...
-
Page 2: Table Of Contents
CONTENTS BEFORE USE ................................3 SAFETY INSTRUCTIONS ............................3 ELECTRICAL CONNECTION ............................. 5 INSTRUCTION FOR USE ............................6 TEMPERATURE LEVEL TABLE ..........................8 TECHNICAL INFORMATION ............................9 CLEANING ..................................9 TROUBLESHOOTING GUIDE ............................ 9 NOISES MADE BY THE HOB ........................... 10 AFTER-SALES SERVICE ............................ -
Page 3: Before Use
BEFORE USE IMPORTANT: The cooking zones will not switch on if pots are not the right size. Only use pots bearing the symbol “INDUCTION SYSTEM” (Figure below) or enameled pots. Place the pot on the required cooking zone before switching the hob on EXISTING POTS AND PANS Use a magnet to check if the pot is suitable for the induction hob: pots and pans are unsuitable if not magnetically detectable. - Page 4 IMPORTANT SAFEGUARDS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT When using electrical appliances, basic safety precautions should always be followed including the following:. Ÿ Read all instructions. Ÿ Do not touch hot surfaces. Use handles or knobs. Ÿ To protect against electrical shock do not immerse cord, plugs, or the cover in water or other liquid.
- Page 5 Ÿ CAUTION! Surface remains hot after use! Do not touch the top plate right after removing the pot or the pan, as the top plate will still be very hot. Ÿ Do Not Cook on Broken Cook-Top – If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock.
-
Page 6: Electrical Connection
ELECTRICAL CONNECTION Ÿ Disconnect the appliance from the power supply. Ÿ The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the regulations provided in this chapter. Ÿ Make sure the voltage specified on the rating label located on the bottom of the appliance is the same as that of the home. - Page 7 CONTROL PANEL LAYOUT Switching the hob On/Off To switch the hob on, press the button and the cooking zone displays light up. To switch off, press the same button until the displays switch off. All the cooking zones are deactivated If the hob has been in use, the residual heat indicator “H”...
-
Page 8: Temperature Level Table
Auto switch off The hob will automatically switch off in 120 minutes when you did not set cooking time, forgot to switch off the hob, and did not operate the hob at all. CONTROL PANEL WARNINGS Residual heat indicator The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user when cooking zones are still hot. -
Page 9: Technical Information
TECHNICAL INFORMATION Voltage: 120V/60 Hz Max. power: 1800W CLEANING & User Maintenance Ÿ Do not use steam cleaners. Ÿ Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is not displayed. IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass. Ÿ... -
Page 10: Noises Made By The Hob
NOISES MADE BY THE HOB Induction hobs can make whistling or crackling sounds during normal operation, these actually come from the pots and pans as a result of the characteristics of the bottoms (for example, bottoms made of several layers of material, or uneven bottoms). These noises vary depending on the pots and pans used and the amount of food they contain, and are not indicative of a defect of any kind.