Pairing Your Remote Control - Grace Digital GDI-EXSEB2600 20 Series User Manual

Remote Control
Pairing Your
Remote Control
Before you use your Remote Control
for the first time, pull and remove
the plastic tab at the bottom of the
Remote Control. Your Remote Control
should be paired to your unit. IF NOT
paired, please follow the steps below.
1. Press on the SoundExtreme to
turn on the speaker.
2. Within 15 seconds, PRESS AND
HOLD
Remote Control will be paired with
your SoundExtreme.
3. Verify that your remote control
works by pressing the
if the speakers light up.
If the speakers do not light up,
press on the SoundExtreme to
turn it off. Wait for a few seconds,
press on the SoundExtreme, and
then repeat the above steps.
Once the remote is paired with the SoundExtreme, it will remain stored
in the SoundExtreme's memory and should not need to be paired again.
Audio
Power Off: PRESS AND HOLD
the SoundExtreme. The remote cannot be used to turn the speaker on.
Press briefly to cycle through the following modes: Bluetooth,
EcoCast Transmitting, EcoCast Receiving, FM, and AUX-IN.
for 3 seconds. Your
to see
for 3 seconds to power off
REMOTE
CONTROL
13