Grace Digital GDI-EXSEB2600 20 Series User Manual page 11

EcoCast: Additional Receiving Speakers
1. Power on the additional SoundExtreme speaker(s) (Speaker C and
Speaker D). Press
Receiving Mode. The Mode LED Indicator will flash Green, and the
speaker(s) will announce, "EcoCast receiving. "
2. On Speaker A (the speaker with the Mode LED Indicator shining solid
Red), PRESS AND HOLD
will flash Red.
3. Once the connection between the speakers is successful, Speaker C
(and Speaker D) will announce, "Connection Successful," and start
playing music from your Bluetooth device.
Notes:
· If all the speakers are turned off, then turned on, the speaker(s) in
EcoCast Receiving Mode (Speakers B, C, and D) will automatically
re-connect to the speaker in Transmitting Mode (Speaker A). If they are
not automatically re-connected, please follow the above steps.
· You can also pair the SoundExtreme with any other ECOXGEAR
speaker bearing the EcoCast symbol
· The EcoCast functionality is only available while using Bluetooth as
your Audio Source at a maximum range of 30 feet between speakers.
· While connecting the SoundExtreme speakers, make sure that the
speakers are within a few feet of each other.
A
to cycle through to and initiate EcoCast
for 6 seconds. The Mode LED Indicator
.
B
C
D
11