Advertisement
Removing water scale:
After using the steamer once or twice, water scale will be accumulated on the inner
surface at the bottom. Amount cf water scale is determined by hardness of the water
from the users' location. It is suggested to remove water scale regularly to avoid
prevention from heat exchange to enable longer life span of the steamer.
1. Add water until it reaches the "Low water level" limit.
2. Place the steam concentrator in the center of steamer.
3. Add some white vinegar into steam concentrator ( around 30ML). The white vinegar
can help to clean up the scale.
Note: be sure to pour the vinegar liquid inside the holes of steam concentrator. It is
not allowed to use other chemicals or cleaning media.
4. Place the lid on the steamer to avoid water splashing out.
5. Connect to the power and choose "Fish" program for 5 minutes; after the time runs
up disconnect the plug and empty the vinegar liquid after it is completely cooled down.
6. Use wet cotton rag to clean the inner surface of the steamer; wipe the steamer with
clean water repeatedly until the vinegar smell disappears.
Note: it is suggested for the user to clean off water scale on surfaces of the steamer
with wrung wet cotton rag after use every time to avoid water scale which accumulated
day by day.
8
Advertisement
