4.
Rotate the dial to select the reverb type.
The following shows the available reverb type settings.
Reverb Type
Off
Room 1 to 5
Large Room 1 or 2
Hall 1 to 5
Stadium 1 to 2
Plate 1 or 2
Delay 1 or 2
Church
Cathedral
• After you rotate the dial once to select a reverb type, you can change the selection further using
– and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
5.
To exit the setting operation, press EXIT.
Display Name
Off
Room 1 to 5
Large Room 1 or 2
Hall 1 to 5
Stadium 1 or 2
Plate 1 or 2
Delay 1 or 2
Church
Cathedral
EN-43
Controlling the Sound of a Performance