Removing A Password - Acer TravelMate 720 User Manual

The password box appears:
2. Type a password. The password may consist of up to
seven characters (A-Z, a-z, 0-9).
Important: Be very careful when typing your
password because the characters do not appear on
the screen.
3. Press Enter. Retype the password to verify your first
entry and press Enter.
After setting the password, the computer automatically
sets the chosen password parameter to Enabled.
4. Press F10 to save the changes and exit the Setup Utility.
To change a password, follow the same steps above, but
enter and confirm a new password instead of leaving these
spaces blank.

Removing a Password

Should you want to remove a password, do the following:
1. Use the
parameter (Supervisor or User) and press the Enter key.
The password box appears:
2. Type the current password and press Enter.
3. Press Enter twice without entering anything in the
password box to remove the existing password.
4. Press F10 to save the changes and exit the Setup Utility.
Chapter 5 Software
and keys to highlight a Set Password
Setup Utility
93