Table of Contents
Advertisement
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
This machine is designed to mix liquid and powdery building materials such as paint, mortar, adhesive, plaster and
similar substances. It must be fitted with the correct mixing tool for the consistency and quantity of material in question
in order to achieve the required mixing effect.
1. INSTALL / REPLACE THE MIXING PADDLE
(See Fig. A1,A2)
Assemble the paddle and extension bar, tighten the
joint using the two spanners supplied. Applying some
lubricant to the threads when you assemble will help
disassembly when you need to store the machine or
change the paddle.
Fit the paddle with extension to the mixer head. Again,
tighten using the two spanners provided.
To remove the mixing paddle, loosen it in reverse
direction with the spanners.
2. ON/OFF SWITCH (See Fig. B)
Depress the lock button (3) then on/off switch (2), release
the on/off switch (2) then lock button (3). Your switch
is now locked on for continuous use. To switch off your
tool just depress and release on/off switch.
Fig. A1
Fig. A2
b
Fig. B
8
1
2
a
Advertisement
Table of Contents
