Acer TravelMate 360 User Manual page 32

24
Firmly connect the EasyLink combo drive (connector to connector)
3
(b) to the computer.
To disconnect the EasyLink combo drive:
Click on the HotIDE icon (
1
Select the stop operation.
2
A message appears to confirm the stop operation.
Click on OK.
3
Disconnect the EasyLink combo drive.
4
Tuck in the EasyLink combo drive cable connector into its storage
5
slot.
Note: If the computer is on, and you disconnect the EasyLink
combo drive without using the HotIDE stop function, the
computer will hang (stop operating normally). Connect the
EasyLink combo drive again to solve this problem. It is advisable
to follow the connect/disconnect procedures discussed above. If
the computer is off, you can disconnect the EasyLink combo drive
at your convenience.
1 Getting to know your TravelMate
) on the Windows taskbar.