Sony PMW-50 Service Manual page 61

6. Remove the two screws (P2 x 4) and the two screws (PVTP2 x 5) to detach the LCD shield (D).
Conductive tape (LCD (D)) (unreusable)
Gasket 10 x 3
7. Remove the tape BT and the EMC radiation sheet (LCD S).
8. Disconnect the fine-wire coaxial cable and the flexible board from the two connectors on the IF-1188 board.
9. Remove the ferrite core.
PMW-50
PVTP2 x 5
Tape 25
(unreusable)
P2 x 4
PVTP2 x 5
LCD shield (D)
2-35