Sony MKS-8080 Maintenance Manual page 16

5. Monitor the above screen and confirm that a message
"Successfully!!!" appears.
n
Writing data to the ROM is in progress until a message
"Successfully!!!" appears. Never turn off the power
switch of the unit.
6. Turn off and on the power of the unit to restart the
unit.
n
The updated FPGA data is applied after the unit has
restarted. After the FPGA has been updated, restart the
unit.
n
Enter "v" on the screen and press the [Enter] key. The
current version name is displayed.
R321x> v
Sony S-BUS Control Unit Ver 3.27
BKS-R Series
Major Version : 3.27
Minor Version : 001
FPGA Version : 005 2012/01/19
Software Downloading Procedure
1. Enter "7777777" and press the [Enter] key.
7 7 7 7 7 7 7
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Welcome to Monitor 2011 (c)SONY
[?, h] : Help
[d] : Memory Dump
[s] : Memory Set
[i] : I/O Dump
[o] : I/O Set
[a] : Diag
[b] : Time
[f] : Funcset
[g] : Go
[l] : Log Display
[m] : Monitor Only
[n] : Reprogram Using Motorola Format
[r] : Mode reset
[v] : Print Version
[p, x] : Reprogram By Xmodem
[y] : RS422 Mode Toggle
[z] : Tsuchinoko Debugger
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
R321x>
1-8 (E)
Jan 19 2012 22:10:35
2. When the above screen appears, enter "x" and press
the [Enter] key.
R321x> x
### Reprogram By Xmodem ###
3. When the above screen appears, select "File →
Transfer → XMODEM → Send" on Tera Term and
select the version update data on the file selection
screen to send it.
n
The following screen is displayed during data transfer.
Tera Term: XMODEM Send
Filename: remctrl.gbf
Protocol:
Packet#:
Bytes transferred:
Elapsed
4. Upon completion of the download, writing data to the
ROM starts.
### Reprogram By Xmodem ###
Finished..[377344] byte
[Verify]
sync ... ok
cs ... ok
type ... ok
panel ... ok
start erase
[addr] = 0x100000
[addr] = 0x110000
[addr] = 0x120000
[addr] = 0x130000
[addr] = 0x140000
[addr] = 0x150000
...done
start program
[addr] = 0x100000
[addr] = 0x110000
[addr] = 0x120000
[addr] = 0x130000
[addr] = 0x140000
[addr] = 0x150000 * ...done
verify flashrom...done
Successfully!!!
XMODEM
1231
157568
0:59 (2.66KB/s)
41.8%
Cancel
MKS-8080/8082