Related Manuals for Raptor R00186
Summary of Contents for Raptor R00186
- Page 1 SINGLE INPUT K TYPE THERMOMETER USER MANUAL R00190 R00186 Before using the instrument, please read this manual carefully and save for future reference.
- Page 2 Safety information Safety Information. In order to use the thermometer correctly, please read the instructions carefully before use, noting any safety information. It is recommended that you keep this instruction manual safe for future reference. Warning. A Warning identifies conditions and actions that pose hazards to the user.
- Page 3 Safety information 3. Do not use the thermometer if it operates abnormally. When in doubt, have the thermometer serviced/checked by an approved service engineer. 4. Do not operate the thermometer around explosive gas, vapour, or dust. 5. Do not use the thermometer and probes on or near live apparatus.
- Page 4 Maintenance Maintenance Information. • The unit may be cleaned using a dry soft cloth, do not use a wet or abrasive cloth, solvents or detergents. • For extra protection always store the instrument in the case provided when not in use. Important Information.
- Page 5 Maintenance Calibration. To maintain the integrity of measurements, Wolseley recommends that the thermometer is calibrated annually at an approved Calibration Laboratory. Wolseley can offer this service, please contact calibration@raptortool.co.uk or call 0344 292 7060 to arrange.
- Page 6 Features Accessories. • Storage pouch. • 1 x 1m K Type wire thermocouple. • 3 x AAA batteries (included). • User instructions. Features. • LCD screen. • Back Light. • °C /°F / K (kelvin) functions. • Data hold function. •...
-
Page 7: Physical Appearance
Features Physical Appearance. Thermocouple port Built in cold compensation (NTC) Settings Power Hold Unit °C /°F / K (Kelvin) Record Max / Min /Avg Back Light Height - 127mm Weight - 105g Width - 58mm Depth - 30mm... - Page 8 Measurement Method Connect Thermocouple/Probe. Press the power button to turn on the thermometer and insert K Type into port. Always ensure + and - pins of the K Type plug are inserted into the correct thermometer ports. Failure to do this will result in an inaccurate reading.
- Page 9 Measurement Method View MAX, MIN and AVG Readings. Press REC button to view Max, Min, Avg temperatures. On pressing the REC button, the timer will automatically start at 00.00. The Max, Min, Avg will display in top right hand side of LCD, with actual temperature reading on main screen.
- Page 10 Measurement Method Data Hold. Press the Hold button to keep the temperature reading on the screen. The “ ” symbol appears on the screen (Fig.4). Press the Hold button again to turn off the Hold function and restore to the measurement status. Fig.4 Back Light.
- Page 11 Settings Set Options. Press the set button to enter the settings mode, by pressing the set button again the settings option menu can be scrolled through. Long press the set button to exit. Auto Power Off Setting (P). Enter the power off setting mode, the thermometer will display P - 10 (Fig.5), use the keys to select the setting...
- Page 12 Settings Offset Setting (0.0). User can adjust the display value of the thermometer to compensate for the error of a thermocouple. The range of permissible adjustment is ±6 °C. After entering the OFFSET, the deviation setting is changed by key. When OFFSET mode is in activation OFFSET will be displayed in the centre of the screen (Fig.6).
- Page 13 Battery Replacement Battery Replacement. In order to avoid inaccurate temperature readings, always replace the batteries when the appears on the top right of LCD screen. Always remove any thermocouple/probe before changing the batteries. When the instrument is not in use for a long time, please take out the batteries to prevent damage caused by leakage.
- Page 14 Battery Replacement NOTE: When the batteries are too low the LCD screen can also show random readings (fig.8). Fig.8...
- Page 15 Technical Handset Temperature Measuring -200°C ~ 1372°C Range -328°F ~ 2501°F Accuracy Range ± (0.15% +1°C) Resolution <1000°C = 0.1°C >1000°C = 1°C Working Temperature & 0°C ~ 40°C Humidity (<80% RH,< 10°C non-condensing) Storage Temperature & -10°C ~ 60°C Humidity (<70% RH, remove the batteries) 3 x 1.5V AAA Batteries...
- Page 16 Limited warranty 1 year warranty against any manufacturing defects or faulty workmanship. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, contamination or abnormal conditions of operation or handling. WEEE Directive 2012/19/EU At the end of the product life, dispose of the instrument &...