Replacing The Lamp - Epson EX3280 User Manual

Caution: If you continue to use the lamp after the above conditions occur, the possibility that the lamp
may explode increases. When the lamp replacement message appears, replace the lamp with a new
one as soon as possible, even if it is still working. You should always have a spare lamp unit ready in
case it is needed.
Caution: Do not repeatedly turn the projector power on and off. This may shorten the lamp's operating
life.
Note: We recommend the use of genuine Epson replacement lamps. The use of non-genuine lamps
may affect projection quality and safety. Any damage or malfunction caused by the use of non-genuine
lamps may not be covered by Epson's warranty.

Replacing the Lamp

Resetting the Lamp Timer
Parent topic: Projector Maintenance
Related references
Projector Light Status
Projector Information Display - Info Menu
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted to the ceiling, if necessary.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
158