Figure 3-4. Er-8/16 Configurations With Multifunction Daq Devices - National Instruments ER-8 User Manual

Signal Connections
Figure 3-4 shows the possible DAQ system configurations using National Instruments
multifunction DAQ devices and the ER-8/16.
Cable *2
E-Series/MIO
Boards *1
DAQCard-700/
SC-2055
PC-LPM-16
DAQCard-AO-2DC
DIO-24
SC-2051
Boards
*1 E-Series boards except AT-MIO-16DE-10
MIO boards except AT-MIO-16D
*2 Cable Options: AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16XE-50:
AT-MIO-16F-5, AT-MIO-16, AT-MIO-16X: NB1 cable
AT-MIO-64E-3: R1005050 ribbon cable (pin # 1-50)
AT-MIO-64F-5: Type NB5 cable (pin # 1-50)
*3 External supply should be connected to the ER-8/16

Figure 3-4. ER-8/16 Configurations with Multifunction DAQ Devices

ER-8/16 User Manual
Port A
Digital I/O
ER-8
SC-2050
NB7 Cable
Port A
NB7 Cable
ER-8
Port A
PSH27-50F-D1 Cable
ER-8
Port A
NB7 Cable
ER-8 or other 8-channel accessories
Port B
NB7 Cable
ER-8 or other 8-channel accessories
Port C
NB7 Cable
ER-8 or other 8-channel accessories
SH6850 shielded cable or R6850 ribbon cable
1200 Series/
SC-2053
Lab Boards
PC-AO-2DC
SC-2053
PSH27-50F-D1 Cable
DAQCard-AO-2DC
3-10 © National Instruments Corporation
Chapter 3
Port A
NB7 Cable
ER-8
Port B
NB7 Cable
ER-8
*3
Port C
NB7 Cable
ER-8
*3
Port A
NB7 Cable
ER-8
Port B
NB7 Cable
ER-8
*3
Port A, Port B
ER-16
*3
*3
*3