Table of Contents
Advertisement
English
Children must not carry out
any cleaning and maintenance
operations
monitored.
Before
connecting
appliance to the water mains,
please read and follow the
applicable regulations in force
in your country.
If the power cord is damaged,
it must be replaced by the
manufacturer,
centre or by adequately
qualified personnel in order
to avoid any risks.
It
is
recommended
installation
current device (RCD) with a
rated residual current not
exceeding 30 mA.
50
without
being
the
its
service
the
of
a
residual
Connect the appliance to a
drinking water main with
pressure between 0.15 MPA
and 0.8 MPA (1.5 and 8 bar);
see data on the data plate.
In
case
of
replacement, use the new set
of tubes supplied with the
appliance. Do not use the old
set anymore.
Access to the internal area is
restricted to persons having
knowledge
and
experience of the appliance,
in particular as far as safety
and hygiene are concerned.
Never clean the internal area
of the machine with power
supply on or with the plug
connected. In any event do
not
use
water
detergents.
filling
tube
practical
jets
or
Hide quick links:
Advertisement
Table of Contents
