Warranty - Craftsman 944.361330 Owner's Manual

WARRANTY

GENERAL: Craftsman products are warranted to be free from defects in materials
or workmanship for a specifi c time period as set-out below (the "Warranty Period").
Warranties extend to the original purchaser of a Craftsman product only. Purchases
made through an online auction or through any website other than www.sears.ca are
excluded. The relevant Warranty Period commences on the original date of purchase.
Within this period, Sears Canada, Inc. will, at its sole option, repair or replace any products
or components which fail in normal use. Such repairs or replacement will be made at no
charge to the customer for parts or labor, provided that the customer shall be responsible
for any transportation cost.
EXCLUSIONS: This warranty does not cover failures due to normal wear, abuse, misuse,
neglect (including but not limited to the use of stale fuel, dirt, abrasives, moisture, rust,
corrosion, or any adverse reaction due to improper storage or use habits), improper
maintenance or failure to follow maintenance guidelines and/or instructions, failure to
operate the product in accordance with the owner's manual or any additional instructions
or information provided at the time of purchase or in subsequent communications with
the original purchaser, accident or unauthorized alterations or repairs made or attempted
by others. Also excluded from warranty coverage – except as provided below - are the
following: maintenance, adjustments, components subject to wear including but not
limited to: cosmetic components, belts, blades, blade adapters, bulbs, tires, fi lters, guide
bars, lubricants, seats, grips, recoil assy's, saw chains and bars, trimmer lines and spools,
spark plugs, starter ropers and tines, and discoloration resulting from ultraviolet light. Any
product missing the model and/or serial number identifi cation label will be disqualifi ed
from coverage under this warranty.
REPAIRS: Repairs have a 90 day warranty. If the defective product is still within the
Warranty Period, then the new warranty is 90 days from the date of repair or to the end of
the original Warranty Period, whichever period is longer.
DISCLAIMERS: THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER ORAL OR
WRITTEN (OTHER THAN AS STATED HEREIN), AND WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM PROVINCE TO
PROVINCE.
IN NO EVENT SHALL SEARS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT
OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE
OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT. THE
EXCLUSIONS IN THIS PARAGRAPH SHALL NOT APPLY IN JURISDICATIONS WHERE
APPLICABLE LAW DOES NOT ALLOW FOR THE EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. IN SUCH JURISDICTIONS, THIS PARAGRAPH SHALL
NOT APPLY, BUT THE REMAINING PROVISIONS OF THIS DOCUMENT SHALL
REMAIN VALID.
Sears retains the exclusive right to repair or replace the product or offer a full refund of
the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND
EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.
CUSTOMER RESPONSIBILITIES: In additional to complying with all suggested
maintenance guidelines and instructions, customers' obligations shall include but shall
not be limited to: operating the product in accordance with the owner's manual or any
additional instructions or information provided at the time of purchase or in subsequent
communications to the purchaser from time to time, exhibit reasonable care in the use,
operation, maintenance, general upkeep and storage of the product. Failure to comply
with these requirements will void any applicable warranty.
4
HONDA 4-CYCLE ENGINE
CAMSHAFT PULLEY
KEY PART
NO. NO. DESCRIPTION
1 14320-ZL8-010 Pulley, Camshaft
2 14324-ZL8-000 Shaft, Cam Pulley
3 14400-Z0J-014 Belt, Timing
(84HU7 G-200)
6 14461-ZL8-000 Shaft, Rocker Arm
11 90112-333-000 Screw, Tappet Adjusting
12 90206-001-000 Nut, Tappet Adjusting
13 91301-ZM0-V31 O-Ring (6.8 x 1.9) (ARAI)
15 14431-Z0J-000 Rocker Arm, Intake Valve
16 14441-Z0J-000 Rocker Arm,
Exhaust Valve
OIL PAN
KEY PART
NO. NO. DESCRIPTION
1 11300-ZM0-811 Pan Assembly, Oil
2 15650-ZM0-801 Gauge Assembly,
Oil Level
4 15625-ZE6-000 Gasket, Oil Filler Cap
5 15631-ZM0-000 Extension, Oil Filler
6 15639-ZM0-000 Lock Washer, Extension
8 16508-ZM0-010 Shaft, Governor Holder
9 16510-ZM0-010 Governor Assembly
10 16511-ZL8-000 Weight, Governor
11 16512-ZM0-000 Holder, Governor Weight
12 16513-ZE1-000 Pin, Governor Weight
13 16531-ZE1-000 Slider, Governor
14 16541-ZM0-000 Shaft, Governor Arm
15 90014-952-000 Bolt, Flange (#6 x 14)
(CT200)
16 90121-952-000 Bolt, Flange (#6 x 25)
(CT200)
17 90451-ZE1-000 Washer, Thrust (6 mm)
18 90602-ZE1-000 Clip, Governor Holder
19 91202-ZL8-003 Oil Seal (28 x 41.25 x 6)
20 91356-MA6-005 O-Ring (14.8 x 2.4) (NOK)
21 94101-068000 Washer, Plain (6 mm)
22 94251-08000 Pin, Lock (8 mm)
23 94301-08200 Pin, Dowel (#8 x 20)
MODEL NUMBER GCV160-LAOS3A
PISTON / CONNECTING ROD
KEY PART
NO. NO. DESCRIPTION
1 13101-Z2A-010 Piston
2 13111-ZE0-000 Pin, Piston
3 13200-Z0J-000 Connecting Rod Assembly
4 90001-ZE1-000 Bolt, Connecting Rod
5 90551-ZE0-000 Clip, Piston Pin (13 mm)
6 13010-Z0L-014 Ring Set, Piston, Standard
(Teikoku)
LABELS
KEY PART
NO. NO. DESCRIPTION
9 87528-Z0L-V20 Mark, Choke Indication
20 87114-ZH7-821 Label, Warning
30 87101-Z8B-000 Mark, Emblem (GCV160)
31 87169-Z8E-000 Mark, Recoil Cover
32 87524-Z8B-000 Mark, Caution,
Fuel Petcock
CHOKE BASE
KEY PART
NO. NO. DESCRIPTION
2 16592-Z2D-800 Spring, Return
5 16614-Z2D-800 Spring, Choke Lever
8 16632-Z0L-801 Rod, Stop
9 90022-888-010 Bolt, Flange (#6 x 20)
(CT200)
14 16610-Z2D-801 Lever Assembly, Choke
16610-Z2D-802 Lever Assembly, Choke
29